TurboCAD Windows

Lines disappear after converting .TCW file to .DWG format
DWG/DXF format does not support bitmap brushes which convert to regular brushes at export to DWG. This conversion cannot be done to get the same appearance....
Sat, 17 Nov, 2018 at 1:28 AM
Edit tool deselects the existing object
Issue: Select the object then select "Edit tool" to node edit it always deselects the existing object and forces you to select it again with the e...
Sat, 17 Nov, 2018 at 1:58 AM
Saving drawing as PNG/JPG with high resolution results in incorrect file
Issue: Drawing not getting correctly converted to PNG/JPG if resolution is high say 3000x3000 Please see 'Tile area' description: http://doc.imsid...
Sat, 17 Nov, 2018 at 1:57 AM
Audit: Inserted values are overwritten
If the value "500 mm" is inserted into one of the Audit options, the value is overwritten with 5E+02. Why aren't the natural values shown? Th...
Sat, 17 Nov, 2018 at 1:55 AM
Close button missing from File menu of Ribbon UI
Ribbon Menu doesn't contain a close button. It is as per design. Most of the software with Ribbon UI don't contain a close button in menu.
Sat, 24 Nov, 2018 at 1:24 AM
TCW file does not scroll after opening it.
After opening attached tcw file, scroll up and scroll down doesn't work. You can encounter a similar problem if the camera settings of your file are sa...
Sat, 24 Nov, 2018 at 1:34 AM
PDF export issue with lines
There is some problem with the PDF save as option in 2018 when compared with TurboCAD 21. When zoom into the PDF file, 2018 is exhibiting jagged lines where ...
Sat, 24 Nov, 2018 at 1:47 AM
Not all object loaded from .DWG file:
1-Open file and select new. 2-Click on open select .dwg format and click on setup. 3-Click on "Set Defaults" then click ok. 4-Select file REM_03.d...
Sat, 24 Nov, 2018 at 1:57 AM
Pick Point Hatching doesn't work for area of intersection between bezier with brush and circle.
Pick Point Hatching doesn't work for area of intersection between bezier with brush and circle. "Pick point hatch" tool does not take in acco...
Sat, 24 Nov, 2018 at 2:18 AM
TCW file exported as DAE format doesn't show correct drawing on opening it
1) Open the attached file "Dim_3.tcw" 2) Goto File --> Save As 3) Choose "Save as type: DAE" from the save as dialogue box. 4) Press ...
Sun, 2 Dec, 2018 at 10:21 PM